Expert Answers about Keystone Montana Big Sky Fifth Wheel
- How To Determine The Correct Slide-Out Seals For A 2012 Keystone Montana 3750FL
- To get the right seal you'll need to remove a portion of the seal to get the side profile of your current seal. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are multiple styles and measurements the seals; some come with a bulb, some don't.
For example the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 60' Long x 3-3/16" Wide # SR68FR you were looking at will come with the bulb and is a Peel-N-Stick...
view full answer... - Recommended Water Heater Replacement For A 2012 Keystone Montana Big Sky 5th Wheel
- If you still have the original water heater in your 2012 Keystone Montana then the options currently available are going to be a bit smaller so you may have to do a bit of framing in order to mount a new water heater. Luckily, we have a video already made showing how to accomplish this, which I've attached below.
As for the replacement, I recommend the Furrion RV Tankless Water Heater # FR93FR. This water heater has a 60,000btu rating and can produce 144 gallons of hot water per hour....
view full answer... - Recommended RV Trailer Hitch Receiver For A 2014 Keystone Montana Big Sky 5th Wheel Trailer
- To know exactly which adjustable width RV trailer hitch receiver will fit your 2014 Keystone Montana Big Sky 5th Wheel trailer you'll need to measure the distance between the inside of the frame beams, this measurement is your frame width.
The Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704 fits a frame width of 22" to 66" wide and has a 5,000lb towing capacity and 500lb tongue weight capacity.
If you find your frame width falls outside of these dimensions then let me...
view full answer... - Is the Aluminum Bearcat Trailer Wheel Rated for 110 PSI
- Yes, the Aluminum Bearcat Trailer Wheel # 274-000039 is rated for 110 PSI. The reason it is not listed, is because the PSI rating does not usually come from the wheel. But, rather the valve stem.
Since you are looking for a 110 PSI rating, you will need to use a metal valve stem like the Americana Metal, Bolt-In Valve Stem # AM20906.
view full answer... - Replacement Shroud For Dometic AC Model 457915
- The photo of the AC nameplate didn't come through but that's okay, as based on the model number I was able to verify with Dometic the correct replacement shroud for your Dometic 457915 AC, which is the following:
- Replacement Shroud # DMC98FR
view full answer...
Go To Results